What is the setting range of Mazak parameter K126?

±99999999 (unit: 0.0001 mm). A changed value takes effect: Immediate.

PARAMMachine parameter · MEASURE (K)

K126

Horizontal axis rotational center offset of the second rotary axis

Q: What does Mazak parameter K126 do?

K126 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). Horizontal axis rotational center offset of the second rotary axis. Set the distance from the spindle holder end in the direction of the horizontal axis to the rotational center of the tool control rotary axis (at the tool side). Set the distance from the rotational center of the table control rotary axis in the direction of the horizontal axis to the rotational center of the table control rotary axis (at the workpiece side) when all axes are in the machine home position.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

<If the second rotary axis rotates for tool control> Set the distance from the spindle holder end in the direction of the horizontal axis to the rotational center of the tool control rotary axis (at the tool side). <If the second rotary axis rotates for table control> Set the distance from the rotational center of the table control rotary axis in the direction of the horizontal axis to the rotational center of the table control rotary axis (at the workpiece side) when all axes are in the machine home position.

Setting

Setting range±99999999

Unit0.0001 mm

Program typeE

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 68, 441. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →