What is the setting range of Mazak parameter K133?

±30000 (unit: 0.0001 mm). A changed value takes effect: Immediate.

PARAMMachine parameter · MEASURE (K)

K133

X-axis position deviation at the spindle center position

Q: What does Mazak parameter K133 do?

K133 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). X-axis position deviation at the spindle center position. Set the X-axis deviation of the spindle center position. Normally set 0 because the zero point is determined with respect to the spindle center position. This parameter is invalid with the 3-axis machine, table tilt type machine, and 4-axis machine of table-side rotation type.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the X-axis deviation of the spindle center position. Normally set 0 because the zero point is determined with respect to the spindle center position. This parameter is invalid with the 3-axis machine, table tilt type machine, and 4-axis machine of table-side rotation type.

Setting

Setting range±30000

Unit0.0001 mm

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 68, 443. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →