What is the setting range of Mazak parameter K2?

0 to 90000 (unit: 0.001°). A changed value takes effect: Immediate.

PARAMMachine parameter · MEASURE (K)

Minimum rotational angle

Q: What does Mazak parameter K2 do?

K2 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). Minimum rotational angle. The minimum rotational angle of the C-axis at shaping block connections Rotational angle of the C-axis at block connections:  The C-axis does not rotate if l  l < K2. 180° 0° If –K2    K2,

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The minimum rotational angle of the C-axis at shaping block connections Rotational angle of the C-axis at block connections:  The C-axis does not rotate if l  l < K2. 180° 0° If –K2    K2,

Setting

Setting range0 to 90000

Unit0.001°

Program typeE

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 399. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →