What is the setting range of Mazak parameter K21?

1 to 1000 (unit: %). A changed value takes effect: Immediate.

PARAMMachine parameter · MEASURE (K)

K21

Coefficient to determine rotation angle when retrying measurement C reference face

Q: What does Mazak parameter K21 do?

K21 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). Coefficient to determine rotation angle when retrying measurement C reference face. During approach operation to measurement start point, if touch sensor is actuated, the C-axis will rotate by angle determined by the measurement object shape angle and setting value K21. Example : CW programmed as measurement direction

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

During approach operation to measurement start point, if touch sensor is actuated, the C-axis will rotate by angle determined by the measurement object shape angle and setting value K21. Example : CW programmed as measurement direction

Setting

Setting range1 to 1000

Unit%

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 61, 404. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →