What is the setting range of Mazak parameter K219?

±99999999 (unit: 0.0001 mm/0.00001 in). A changed value takes effect: Immediate.

PARAMMachine parameter · MEASURE (K)

K219

Coordinate measurement - plane inclination C, Skipping stroke limit

Q: What does Mazak parameter K219 do?

K219 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). Coordinate measurement - plane inclination C, Skipping stroke limit. Sets the limit of travel at a skip feedrate while executing coordinate measurement (plane inclination C measurement). If the touch sensor does not come into contact with the workpiece even after traveling this distance at a skip feedrate, the alarm 990 MACRO MEASUREMENT ALARM 1 occurs.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Sets the limit of travel at a skip feedrate while executing coordinate measurement (plane inclination C measurement). If the touch sensor does not come into contact with the workpiece even after traveling this distance at a skip feedrate, the alarm 990 MACRO MEASUREMENT ALARM 1 occurs.

Setting

Setting range±99999999

Unit0.0001 mm/0.00001 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 68, 445. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →