What is the setting range of Mazak parameter K222?

0 to 255 (unit: Number of times). A changed value takes effect: Immediate.

PARAMMachine parameter · MEASURE (K)

K222

Coordinate measurement - plane inclination C, Number of re-measurements

Q: What does Mazak parameter K222 do?

K222 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). Coordinate measurement - plane inclination C, Number of re-measurements. Sets the maximum number of re-measurements while executing coordinate measurement (plane inclination C measurement). If the number of re-measurements has exceeded the value set for this parameter, the alarm 997 MACRO MEASUREMENT ALARM 8 occurs.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Sets the maximum number of re-measurements while executing coordinate measurement (plane inclination C measurement). If the number of re-measurements has exceeded the value set for this parameter, the alarm 997 MACRO MEASUREMENT ALARM 8 occurs.

Setting

Setting range0 to 255

UnitNumber of times

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 68, 445. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →