What is the setting range of Mazak parameter K223?

±99999999 (unit: 0.0001 mm/0.00001 in). A changed value takes effect: Immediate.

PARAMMachine parameter · MEASURE (K)

K223

Coordinate measurement - plane inclination C, Permissible difference for skip coordinates X

Q: What does Mazak parameter K223 do?

K223 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). Coordinate measurement - plane inclination C, Permissible difference for skip coordinates X. Sets the permissible difference between the skip coordinates X at the first and second points while executing coordinate measurement (plane inclination C measurement). If the difference between the skip coordinates X exceeds the value set for this parameter, measurement is performed again. The set value is taken as an absolute value.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Sets the permissible difference between the skip coordinates X at the first and second points while executing coordinate measurement (plane inclination C measurement). If the difference between the skip coordinates X exceeds the value set for this parameter, measurement is performed again. The set value is taken as an absolute value.

Setting

Setting range±99999999

Unit0.0001 mm/0.00001 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 68, 446. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →