‹ALARMSMazatrol Assistant
PARAMMachine parameter · MEASURE (K)
K224

Coordinate measurement - plane inclination C, C-axis angle shift during retry operation

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does

Coordinate measurement - plane inclination C, C-axis angle shift during retry operation

Sets the C-axis angle shift during retry operation while executing coordinate measurement (plane inclination C measurement). When 0 is set, no retry operation is performed. When other than 0 is set, a maximum of two retry operations are performed.  For the first retry operation, C-axis angle at the start of measurement + K224  For the second retry operation, C-axis angle at the start of measurement – K224 If the sensor comes ON during approach for measurement after the second retry operation, the alarm 991 MACRO MEASUREMENT ALARM 2 occurs.

Setting
Setting range±360
Unit
Program typeM
Takes effectImmediate
Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 68, 446. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →