What is the setting range of Mazak parameter K231?

±99999999 (unit: 0.0001 mm). A changed value takes effect: Immediate.

PARAMMachine parameter · MEASURE (K)

K231

Horizontal axis rotational center offset of the first rotary axis (2nd set of axes)

Q: What does Mazak parameter K231 do?

K231 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). Horizontal axis rotational center offset of the first rotary axis (2nd set of axes). Set the distance from the rotational center of the tool control rotary axis (at the tool side) in the direction of the horizontal axis to the rotational center of the tool control rotary axis (at the root side). Set the distance from the spindle nose point to the rotational center of the table control rotary axis (at the root side) in the horizontal axis direction, with all axes at the machine zero points. (For the 2nd set of axes when selecting multiple axis sets for 5-axis machining)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

<If the first rotary axis is the tool control rotary axis> Set the distance from the rotational center of the tool control rotary axis (at the tool side) in the direction of the horizontal axis to the rotational center of the tool control rotary axis (at the root side). <If the first rotary axis is the table control rotary axis> Set the distance from the spindle nose point to the rotational center of the table control rotary axis (at the root side) in the horizontal axis direction, with all axes at the machine zero points. (For the 2nd set of axes when selecting multiple axis sets for 5-axis machining)

Setting

Setting range±99999999

Unit0.0001 mm

Program typeE

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 69, 449. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →