Height axis rotational center offset of the first rotary axis (2nd set of axes)

Q: What does Mazak parameter K233 do?

K233 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). Height axis rotational center offset of the first rotary axis (2nd set of axes). Set the distance from the rotational center of the tool control rotary axis (at the tool side) to the rotational center of the tool control rotary axis (at the root side) in the height axis direction. Note : In the case of machines with the capability of Maza-Check, the height axis rotational center offset is equal to K233 + J531 (amount of height axis rotational center offset of the rotary axis on the tool side). Set the distance from the spindle nose point to the rotational center of the table control rotary axis (at the root side) in the height axis direction, with all axes at the machine zero points. Note : When K225 = 2 (machine type: mix type), K233 has the same meaning as BA62 (the offset for the B-axis - spindle). In the case of inch specifications, multiply the BA62 value by 2.54, round off to the nearest whole number, and enter this value for K233. (For the 2nd set of axes when selecting multiple axis sets for 5-axis machining)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

<If the first rotary axis is the tool control rotary axis> Set the distance from the rotational center of the tool control rotary axis (at the tool side) to the rotational center of the tool control rotary axis (at the root side) in the height axis direction. Note : In the case of machines with the capability of Maza-Check, the height axis rotational center offset is equal to K233 + J531 (amount of height axis rotational center offset of the rotary axis on the tool side). <If the first rotary axis is the table control rotary axis> Set the distance from the spindle nose point to the rotational center of the table control rotary axis (at the root side) in the height axis direction, with all axes at the machine zero points. Note : When K225 = 2 (machine type: mix type), K233 has the same meaning as BA62 (the offset for the B-axis - spindle). In the case of inch specifications, multiply the BA62 value by 2.54, round off to the nearest whole number, and enter this value for K233. (For the 2nd set of axes when selecting multiple axis sets for 5-axis machining)

Setting

Setting range±99999999

Unit0.0001 mm

Program typeE

Takes effect—

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 69, 449. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →