‹ALARMSMazatrol Assistant
PARAMMachine parameter · MEASURE (K)
K237

Height axis rotational center offset of the second rotary axis (2nd set of axes)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
What it does

Height axis rotational center offset of the second rotary axis (2nd set of axes)

<If the second rotary axis rotates for tool control> Set the distance from the spindle holder end to the rotational center of the tool control rotary axis (at the tool side) in the height axis direction. <If the second rotary axis is the table control rotary axis> Set the distance from the rotational center of the table control rotary axis (at the root side) to the rotational center of the table control rotary axis (at the workpiece side) in the height axis direction, with all axes at the machine zero points. (For the 2nd set of axes when selecting multiple axis sets for 5-axis machining)

Setting
Setting range±99999999
Unit0.0001 mm
Program typeE
Takes effectImmediate
Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 69, 450. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →