What does Mazak parameter K243 do?

K243 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). M code number of the forward rotation command for orbit machining. Set the M code number of the forward rotation command for orbit machining.

What is the setting range of Mazak parameter K243?

0 to 999. A changed value takes effect: After stop of movement.

‹ALARMSMazatrol Assistant

PARAMMachine parameter · MEASURE (K)

K243

M code number of the forward rotation command for orbit machining

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the M code number of the forward rotation command for orbit machining.

Setting

Setting range0 to 999

Unit—

Program typeE

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 69, 451. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →