What is the setting range of Mazak parameter K250?

0 to 65000 (unit: ms). A changed value takes effect: Immediate.

PARAMMachine parameter · MEASURE (K)

K250

Wait time before turning ON of zero-speed signal upon ending hobbing II (position controlled hobbing)

Q: What does Mazak parameter K250 do?

K250 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). Wait time before turning ON of zero-speed signal upon ending hobbing (position controlled hobbing). Sets the time to wait before the zero-speed signal of the hobbing axis (V-axis) turns ON upon specifying G113 (hobbing end) or interruption of hobbing during hobbing operation.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Wait time before turning ON of zero-speed signal upon ending hobbing (position controlled hobbing)

Sets the time to wait before the zero-speed signal of the hobbing axis (V-axis) turns ON upon specifying G113 (hobbing end) or interruption of hobbing during hobbing operation.

Setting

Setting range0 to 65000

Unitms

Program typeE

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 69, 454. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →