Threshold value for singular posture in the cutting point command mode (for other than rapid feed)

Q: What does Mazak parameter K251 do?

K251 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). Threshold value for singular posture in the cutting point command mode (for other than rapid feed). During operation other than rapid feed (G00), the tool is said to be in a singular posture when the vector normal to machining face and the tool posture vector are parallel. When the orientations of the two vectors are within the threshold value, the tool is considered to be in a singular posture. * When 0 is set, 500 (0.0000500°) is assumed. * For rapid feed (G00), parameter K254 is used. [Related parameters] K254

Q: What is the setting range of Mazak parameter K251?

0 to 99999999 (unit: 0.0000001°).

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Threshold value for singular posture in the cutting point command mode (for other than rapid feed)

During operation other than rapid feed (G00), the tool is said to be in a singular posture when the vector normal to machining face and the tool posture vector are parallel. When the orientations of the two vectors are within the threshold value, the tool is considered to be in a singular posture. * When 0 is set, 500 (0.0000500°) is assumed. * For rapid feed (G00), parameter K254 is used. [Related parameters] K254

Setting

Setting range0 to 99999999

Unit0.0000001°

Program typeE

Takes effect—

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 69, 454. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →