What does Mazak parameter K253 do?

K253 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). 1 bit settings.

PARAMMachine parameter · MEASURE (K)

K253

Angle that sets the mill spindle tool tip in the +X-axis direction in orbit machining

Q: Which bits does Mazak parameter K253 have?

Bit 0: Angle that sets the mill spindle tool tip in the +X-axis direction in orbit machining

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

Bit settings — K253 is set bit by bit

bit 0
Angle that sets the mill spindle tool tip in the +X-axis direction in orbit machining
Set the angle of the mill spindle when the tip of the tool in the mill spindle is oriented in the +X-axis direction in orbit machining. During rapid feed (G00), the tool is said to be in a singular posture when the vector normal to machining face and the tool posture vector are parallel. When the orientations of the two vectors are within the threshold value, the tool is considered to be in a singular posture. * When 0 is set, 500 (0.0000500°) is assumed. * For other than rapid feed (G00), parameter K251 is used. [Related parameters] K251 Fixed value (1)

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 69, 455. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →