‹ALARMSMazatrol Assistant
PARAMMachine parameter · MEASURE (K)
K258

MEASURE bit settings (5 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
Bit settings — K258 is set bit by bit
  1. bit 0

    Spindle speed override unit switching function

    Used to add tool axis direction coordinate Tz in the HANDLE INTERUPT window. 0: Invalid 1: Valid 0: Invalid (using the Z-axis as the feed axis in the workpiece axis direction) 1: Valid (discriminating the feed axis in the workpiece axis direction according to parameters K113 to K127)

    Range 0, 1 · Takes effect: Immediate

  2. bit 1

    MDI input support function

    0: Invalid 1: Valid

    Takes effect: At power on

  3. bit 2

    HANDLE INTERUPT window Tx display

    Used to add tool axis direction coordinate Tx in the HANDLE INTERUPT window. 0: Invalid 1: Valid

    Range 0, 1 · Takes effect: Immediate

  4. bit 3

    HANDLE INTERUPT window Ty display

    Used to add tool axis direction coordinate Ty in the HANDLE INTERUPT window. 0: Invalid 1: Valid

    Range 0, 1

  5. bit 4

    HANDLE INTERUPT window Tz display

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 70, 457, 458. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →