What does Mazak parameter K259 do?

K259 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). 3 bit settings.

Which bits does Mazak parameter K259 have?

Bit 0: Hobbing: Axis configuration discrimination function Bit 1: Hobbing II (position controlled hobbing), Quasi constant inclination control Bit 2: Fixed value

‹ALARMSMazatrol Assistant

PARAMMachine parameter · MEASURE (K)

K259

MEASURE bit settings (3 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

Bit settings — K259 is set bit by bit

bit 0
Hobbing: Axis configuration discrimination function
Fixed value Fixed value
bit 1
Hobbing II (position controlled hobbing), Quasi constant inclination control
0: Invalid 1: Valid
bit 2
Fixed value

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 70, 458, 459. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →