What does Mazak parameter K281 do?

K281 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). 2 bit settings.

Which bits does Mazak parameter K281 have?

Bit 0: Laser tool length/diameter measurement on an arbitrary axis Bit 1: TOOL EYE measurement, tool breakage detection reference selection

‹ALARMSMazatrol Assistant

PARAMMachine parameter · MEASURE (K)

K281

MEASURE bit settings (2 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

Bit settings — K281 is set bit by bit

bit 0
Laser tool length/diameter measurement on an arbitrary axis
Laser tool length/diameter measurement on an arbitrary axis 0 : Invalid 1 : Valid
Range 0, 1 · Takes effect: At power on
bit 1
TOOL EYE measurement, tool breakage detection reference selection

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 70, 460. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →