What is the setting range of Mazak parameter K35?

0 to 65535. A changed value takes effect: At power on.

PARAMMachine parameter · MEASURE (K)

K35

Pre-measuring spindle speed for laser tool diameter measurement

Q: What does Mazak parameter K35 do?

K35 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). K34 Pre-measuring spindle speed for laser tool length measurement K35 Pre-measuring spindle speed for laser tool diameter measurement. Specify the pre-measuring spindle speed for laser tool length (diameter) measurement.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

K34 Pre-measuring spindle speed for laser tool length measurement K35 Pre-measuring spindle speed for laser tool diameter measurement

Specify the pre-measuring spindle speed for laser tool length (diameter) measurement.

Setting

Setting range0 to 65535

Unit—

Program typeM, E

Takes effectAt power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 61, 405. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →