What is the setting range of Mazak parameter K43?

0 to 120000 (unit: mm/min). A changed value takes effect: After stop of movement.

PARAMMachine parameter · MEASURE (K)

K43

G31.2 skipping speed

Q: What does Mazak parameter K43 do?

K43 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). G31.2 skipping speed. The feed rate during axis movement by G31.2 (multi-step skip function) If the same block as that of G31.2 contains an F command, then that feed rate becomes valid.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The feed rate during axis movement by G31.2 (multi-step skip function) If the same block as that of G31.2 contains an F command, then that feed rate becomes valid.

Setting

Setting range0 to 120000

Unitmm/min

Program typeE

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 62, 407. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →