What is the setting range of Mazak parameter K45?

0 to 120000 (unit: mm/min). A changed value takes effect: After stop of movement.

PARAMMachine parameter · MEASURE (K)

K45

G31.4 skipping speed

Q: What does Mazak parameter K45 do?

K45 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). G31.4 skipping speed. The feed rate during axis movement by G31.4 (skip function) If the same block as that of G31.4 contains an F command, then that feed rate becomes valid.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

The feed rate during axis movement by G31.4 (skip function) If the same block as that of G31.4 contains an F command, then that feed rate becomes valid.

Setting

Setting range0 to 120000

Unitmm/min

Program typeE

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 62, 408. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →