What is the setting range of Mazak parameter K47?

100 to 998. A changed value takes effect: Immediate.

PARAMMachine parameter · MEASURE (K)

K47

M-code for external workpiece measurement

Q: What does Mazak parameter K47 do?

K47 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). M-code for external workpiece measurement. Specify the M-code that is output at the start and end of measurement in the external pattern of workpiece measurement unit. Measurement start: M-code of a “value set at parameter K47” is output. Measurement end: M-code of a “value set at parameter K47 + 1” is output. * If the set value is out of the range, this parameter is invalid. (Setting range: 100 to 998)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Specify the M-code that is output at the start and end of measurement in the external pattern of workpiece measurement unit. Measurement start: M-code of a “value set at parameter K47” is output. Measurement end: M-code of a “value set at parameter K47 + 1” is output. * If the set value is out of the range, this parameter is invalid. (Setting range: 100 to 998)

Setting

Setting range100 to 998

Unit—

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 62, 408. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →