What is the setting range of Mazak parameter K51?

0 to 1000. A changed value takes effect: After stop of movement.

PARAMMachine parameter · MEASURE (K)

K51

M-code during workpiece measurement retry operation

Q: What does Mazak parameter K51 do?

K51 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). M-code during workpiece measurement retry operation. Set the M-code to be output if workpiece measurement results in an error and is to be retried. Note : If “0” is set, this function will be invalid. in an error and is to be retried

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the M-code to be output if workpiece measurement results in an error and is to be retried. Note : If “0” is set, this function will be invalid. in an error and is to be retried

Setting

Setting range0 to 1000

Unit—

Program typeM, E

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 62, 409. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →