What is the setting range of Mazak parameter K58?

0 to 3. A changed value takes effect: Immediate.

PARAMMachine parameter · MEASURE (K)

K58

Type of T-code macroprogram appointment call

Q: What does Mazak parameter K58 do?

K58 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). Type of T-code macroprogram appointment call. This parameter is used during T-code macroprogram appointment to select the method of calling the macroporgram whose work number has been set using the K39 parameter. Note : Valid only when bit 3 of K105 is 1.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

This parameter is used during T-code macroprogram appointment to select the method of calling the macroporgram whose work number has been set using the K39 parameter. Note : Valid only when bit 3 of K105 is 1.

Setting

Setting range0 to 3

Unit—

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 62, 411. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →