What does Mazak parameter K71 do?

K71 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). 8 bit settings.

Which bits does Mazak parameter K71 have?

Bit 0: G31.3 skip condition SKIP-2 Bit 1: G31.3 skip condition SKIP-10 Bit 2: G31.3 skip condition SKIP-3 Bit 3: G31.3 skip condition SKIP-11 Bit 4: G31.3 skip condition SKIP-5 Bit 5: G31.3 skip condition SKIP-13 Bit 6: G31.3 skip condition SKIP-6 Bit 7: G31.3 skip condition SKIP-14

‹ALARMSMazatrol Assistant

PARAMMachine parameter · MEASURE (K)

K71

MEASURE bit settings (8 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

Bit settings — K71 is set bit by bit

bit 0
G31.3 skip condition SKIP-2
In the execution of the G31.3 command, whether or not SKIP-2 is used as the skip signal: 0: Not used as the skip signal 1: Used as the skip signal
Range 0, 1 · Takes effect: After stop of movement
bit 1
G31.3 skip condition SKIP-10
In the execution of the G31.3 command, whether or not SKIP-10 is used as the skip signal: 0: Not used as the skip signal 1: Used as the skip signal
Range 0, 1 · Takes effect: After stop of movement
bit 2
G31.3 skip condition SKIP-3
In the execution of the G31.3 command, whether or not SKIP-3 is used as the skip signal: 0: Not used as the skip signal 1: Used as the skip signal
Range 0, 1 · Takes effect: After stop of movement
bit 3
G31.3 skip condition SKIP-11
In the execution of the G31.3 command, whether or not SKIP-11 is used as the skip signal: 0: Not used as the skip signal 1: Used as the skip signal
Range 0, 1 · Takes effect: After stop of movement
bit 4
G31.3 skip condition SKIP-5
In the execution of the G31.3 command, whether or not SKIP-5 is used as the skip signal: 0: Not used as the skip signal 1: Used as the skip signal
Range 0, 1 · Takes effect: After stop of movement
bit 5
G31.3 skip condition SKIP-13
In the execution of the G31.3 command, whether or not SKIP-13 is used as the skip signal: 0: Not used as the skip signal 1: Used as the skip signal
Range 0, 1 · Takes effect: After stop of movement
bit 6
G31.3 skip condition SKIP-6
In the execution of the G31.3 command, whether or not SKIP-6 is used as the skip signal: 0: Not used as the skip signal 1: Used as the skip signal
Range 0, 1 · Takes effect: After stop of movement
bit 7
G31.3 skip condition SKIP-14
In the execution of the G31.3 command, whether or not SKIP-14 is used as the skip signal: 0: Not used as the skip signal 1: Used as the skip signal
Range 0, 1 · Takes effect: After stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 63, 64, 419, 420, 421. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →