What is the setting range of Mazak parameter K75?

&0 to &7F. A changed value takes effect: After stop of movement.

PARAMMachine parameter · MEASURE (K)

K75

Contactor control output device 1 (Safety supervisory function)

Q: What does Mazak parameter K75 do?

K75 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). Contactor control output device 1 (Safety supervisory function). Specify a remote I/O device that is to output a contactor activating/deactivating signal when the safety supervisory function is executed. Note : The signal will not be output if “&0” is specified.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Specify a remote I/O device that is to output a contactor activating/deactivating signal when the safety supervisory function is executed. Note : The signal will not be output if “&0” is specified.

Setting

Setting range&0 to &7F

Unit—

Program typeM, E

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 64, 422. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →