What is the setting range of Mazak parameter K77?

&0 to &7F. A changed value takes effect: After stop of movement.

PARAMMachine parameter · MEASURE (K)

K77

Door switch input device (Safety supervisory function)

Q: What does Mazak parameter K77 do?

K77 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). Door switch input device (Safety supervisory function). Enter the device number of the remote I/O device to be activated to input a door open/closed status signal. The device of the entered serial device number will be reserved according to the particular setting of K78 (the parameter for setting the number of door switches). Note : Door switch input will be invalid if “&0” is entered.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Enter the device number of the remote I/O device to be activated to input a door open/closed status signal. The device of the entered serial device number will be reserved according to the particular setting of K78 (the parameter for setting the number of door switches). Note : Door switch input will be invalid if “&0” is entered.

Setting

Setting range&0 to &7F

Unit—

Program typeM, E

Takes effectAfter stop of movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 64, 423. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →