What is the setting range of Mazak parameter K83?

0 to 32767 (unit: 0.00005 mm). A changed value takes effect: Immediate.

PARAMMachine parameter · MEASURE (K)

K83

Maximum amount of compensation for workpiece thermal expansion

Q: What does Mazak parameter K83 do?

K83 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). Maximum amount of compensation for workpiece thermal expansion. Specify the maximum amount of compensation for workpiece thermal expansion. In order to prevent eventual collision, the maximum amount should not exceed the distance between software limit and mechanical end on any axis concerned. Note : 1. If 0 is set here, compensation will not be made for workpiece thermal expansion. 2. This parameter is valid for machining centers with the capability of compensating for workpiece thermal expansion.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Specify the maximum amount of compensation for workpiece thermal expansion. In order to prevent eventual collision, the maximum amount should not exceed the distance between software limit and mechanical end on any axis concerned. Note : 1. If 0 is set here, compensation will not be made for workpiece thermal expansion. 2. This parameter is valid for machining centers with the capability of compensating for workpiece thermal expansion.

Setting

Setting range0 to 32767

Unit0.00005 mm

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 64, 424. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →