What is the setting range of Mazak parameter K84?

0 to 32767 (unit: 0.00005 mm). A changed value takes effect: Immediate.

PARAMMachine parameter · MEASURE (K)

K84

Maximum allowable amount of compensation for workpiece thermal expansion in each interpolating cycle

Q: What does Mazak parameter K84 do?

K84 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). Maximum allowable amount of compensation for workpiece thermal expansion in each interpolating cycle. Specify the maximum amount of compensation for workpiece thermal expansion in each interpolating cycle. If the compensation amount computed exceeds the maximum value (as set with K84), compensation will be executed by dividing the interpolation motion into multiple sections. Note : 1. If 0 is set here, the amount is set to 0.001 mm. 2. This parameter is valid for machining centers with the capability of compensating for workpiece thermal expansion.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Specify the maximum amount of compensation for workpiece thermal expansion in each interpolating cycle. If the compensation amount computed exceeds the maximum value (as set with K84), compensation will be executed by dividing the interpolation motion into multiple sections. Note : 1. If 0 is set here, the amount is set to 0.001 mm. 2. This parameter is valid for machining centers with the capability of compensating for workpiece thermal expansion.

Setting

Setting range0 to 32767

Unit0.00005 mm

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 64, 424. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →