What does Mazak parameter K94 do?

K94 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). 6 bit settings.

Which bits does Mazak parameter K94 have?

Bit 0: Selection of whether menu function is to be made invalid after operation has been stopped by [ATC STOP] Bit 1: Indexing in measurement unit Bit 2: Program editing on the EIA MONITOR display during multi-system operation Bit 3: W-axis command code selection for the MDI mode Bit 4: Indexing in cases where the next machining is started without specifying an index unit after a measurement unit has been executed Bit 5: Display/no display of a block start interlock alarm if tool life of a tool specified in the block has expired

‹ALARMSMazatrol Assistant

PARAMMachine parameter · MEASURE (K)

K94

MEASURE bit settings (6 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

Bit settings — K94 is set bit by bit

bit 0
Selection of whether menu function is to be made invalid after operation has been stopped by [ATC STOP]
If [ATC STOP] does not need to be deselected to restart the automatic operation that has been stopped by tapping [ATC STOP], set this parameter to “1” (only for applicable machines). 0: [ATC STOP] is to be made invalid 1: [ATC STOP] is not to be made invalid
Range 0, 1 · Takes effect: Immediate
bit 1
Indexing in measurement unit
Select indexing operation in measurement unit when the rotation position in index unit is blank. 0: Move to the zero point. 1: Do not move.
Range 0, 1 · Takes effect: Immediate
bit 2
Program editing on the EIA MONITOR display during multi-system operation
Selection for whether or not program editing is allowed on the EIA MONITOR display when any of the multiple control systems is executing automatic operation 0: Not allowed 1: Allowed
Range 0, 1 · Takes effect: Immediate
bit 3
W-axis command code selection for the MDI mode
Command code to be displayed in the MDI window when [W SUB] is selected in the MDI mode 0: G110B2 1: G110Z[B]2
Range 0, 1 · Takes effect: Immediate
bit 4
Indexing in cases where the next machining is started without specifying an index unit after a measurement unit has been executed
0: Reset to the B-axis angle that is valid before measurement. 1: Hold the B-axis angle at the time of measurement. * This parameter is valid only when the program is created in the WPC scheme.
Range 0, 1 · Takes effect: Immediate
bit 5
Display/no display of a block start interlock alarm if tool life of a tool specified in the block has expired
0: Displayed 1: Not displayed (A tool life alarm will be displayed.) * Only the alarm display is invalid while interlock remains valid. Alarm 135 BLOCK START INTERLOCK is not displayed on the ALARM or ALARM HISTORY display.
Range 0, 1 · Takes effect: Immediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 64, 65, 426, 427. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →