What is the setting range of Mazak parameter K98?

&41 to &5A (unit: Hexadecimal, two digits). A changed value takes effect: Immediate.

PARAMMachine parameter · MEASURE (K)

K98

B-axis misalignment correction, name of orthogonal axis

Q: What does Mazak parameter K98 do?

K98 is a Machine parameter in the MEASURE group of the MAZATROL SmoothX control (INTEGREX e-670H). B-axis misalignment correction Name of orthogonal axis. Specify the name of the axis to be made orthogonal with respect to the direction of the spindle when the angle of the B-axis is 0 degrees. Note : If 0 is entered, the axis will be regarded as the X-axis (&58).

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

B-axis misalignment correction Name of orthogonal axis

Specify the name of the axis to be made orthogonal with respect to the direction of the spindle when the angle of the B-axis is 0 degrees. Note : If 0 is entered, the axis will be regarded as the X-axis (&58).

Setting

Setting range&41 to &5A

UnitHexadecimal, two digits

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 65, 429. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →