TABLE bit settings (8 bits)

1. bit 0

   Measuring equipment selection

   Select the measuring equipment to be used to perform MDI tool measurements and EIA tool measurements. 0: Measuring table 1: Laser tool measuring equipment

   Range 0, 1 · Takes effect: Immediate

2. bit 1

   Selection of a rotational reference coordinate system for WPC-th

   Select a rotational reference coordinate system for WPC-th. 0: Workpiece coordinates (Index angle B) 1: Machine coordinates

   Range 0, 1 · Takes effect: Immediate

3. bit 2

   Selection of measuring equipment

   0: Measuring table (see L22 to L26) 1: TOOL EYE (see BA95 to BA102)

   Range 0, 1 · Takes effect: Immediate

4. bit 3

   Selection of whether workpiece measurement results and tool measurement results are to be stored into tool data of the lower turret

   Select whether workpiece measurement results and tool measurement results are to be stored into tool data of the lower turret. 0: Measurement results are stored into lower-turret tool data 1: Measurement results are not stored into lower-turret tool data

   Range 0, 1 · Takes effect: Immediate

5. bit 4

   Selection of whether to enable or disable the fixed amount compensation function

   Specify whether to enable or disable the fixed amount compensation function. 0: Disabled 1: Enabled

   Range 0, 1 · Takes effect: Immediate

6. bit 5

   B-axis user-defined angle setting in the coordinate measurement unit and workpiece measurement unit invalid/valid

   Select whether the user-defined angle setting for the B-axis in the coordinate measurement unit and workpiece measurement unit is to be made valid or invalid. 0: Invalid 1: Valid

   Range 0, 1 · Takes effect: Immediate

7. bit 6

   Non-compensation area for the tool measurement and execution timing of tool and workpiece measurement operation

   Set the non-compensation area for the tool measurement and execution timing of tool and workpiece measurement operation. 0: MT Pro scheme Non-compensation area setting Non-compensation area for the tool measurement based on the measuring tolerance (K17 and K18) invalid (handled as if K17 = 0 and K18 = 100) Execution timing of tool and workpiece measurement operation The measurement unit is executed whenever the parts count reaches same or a multiple of the specified measurement interval in addition to the first time. 1: M Pro scheme Non-compensation area setting Non-compensation area for the tool measurement based on the measuring tolerance (K17 and K18) valid Execution timing of tool and workpiece measurement operation The measurement unit is executed whenever the program execution count reaches same or a multiple of the specified measurement interval, omitting the first time.

   Range 0, 1 · Takes effect: Immediate

8. bit 7

   Selection of laser measuring menu display

   Select whether the laser measuring menu is to be displayed when laser tool measuring equipment is selected (L106 bit 0 = 1) as tool measuring equipment. 0: Display of the laser measuring menu 1: No display of the laser measuring menu

   Range 0, 1 · Takes effect: Immediate

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 74, 487, 488, 489. Reference and explanation only — not a reproduction of the manual.