TABLE bit settings (8 bits)

1. bit 0

   Tool path drawing

   In AGX machines, the tool locus (on the TRACE or TOOL PATH CHECK display) on the following coordinate is drawn by the EIA/ISO program. 0: Loft on the standard coordinates system 1: Loft on the machine coordinates system Note : When 1 (drawing on the machine coordinate) is selected, the loft does not correspond to the form made on the MAZATROL coordinates system. However, 1 makes a loft corresponding to the tool movement of the machine.

   Range 0, 1 · Takes effect: Immediate

2. bit 1

   Tailstock function valid/invalid

   Set whether the tailstock function is to be made valid or invalid. 0: Tailstock function invalid 1: Tailstock function valid

   Range 0, 1 · Takes effect: At power on

3. bit 2

   Tailstock type

   Select whether the tailstock included in the tailstock-equipped machine specifications is of the conventional type or the motor-driven type. 0: Conventional type 1: Motor-driven type

   Range 0, 1 · Takes effect: Immediate

4. bit 3

   Whether tail thrust is also to be displayed in pounds (lbs)

   Select whether the tail thrust is also to be displayed in pounds (lbs). 0: Display off 1: Display on

   Range 0, 1 · Takes effect: Immediate

5. bit 4

   LBB No. setting for the grooving I.D. tool, threading I.D. tool, or touch sensor, valid/invalid

   LBB No. setting for the grooving I.D. tool, threading I.D. tool, or touch sensor 0: Invalid 1: Valid

   Range 0, 1 · Takes effect: Immediate

6. bit 5

   XYZ-axis operation for the first T-command after cycle start

   0: Moves the X-axis to the third zero point and the Y/Z-axes to the respective zero points. 1: Moves the X-axis to the third zero point and the Y/Z-axes to the respective second zero points.

   Range 0, 1 · Takes effect: Immediate

7. bit 6

   A-axis operation for the first T-command after cycle start

   0: Does not operate the A-axis. 1: Returns the A-axis to its zero point.

   Range 0, 1 · Takes effect: Immediate

8. bit 7

   Heavy tool designation valid/invalid

   0: Heavy tool designation valid 1: Heavy tool designation invalid

   Range 0, 1 · Takes effect: Immediate

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 74, 490, 491. Reference and explanation only — not a reproduction of the manual.