TABLE bit settings (8 bits)

1. bit 0

   Fixed value (0)

2. bit 1

   Fixed value (0)

3. bit 2

   Fixed value (0)

4. bit 3

   Fixed value (0)

5. bit 4

   Fixed value (0)

6. bit 5

   Incorporating the C-axis coordinate into the TOOL PATH CHECK, TRACE, and SHAPE CHECK displays of the VRX machine

   Set whether the C-axis coordinate obtained by C-axis coordinate rotation in the indexing unit is to be incorporated into the path and shape drawings on the TOOL PATH CHECK, TRACE, and SHAPE CHECK displays of the VRX machine. 0: Incorporation valid. 1: Incorporation invalid (M640M-5X compatible).

   Range 0, 1 · Takes effect: Immediate

7. bit 6

   Fixed value (0)

8. bit 7

   Displaying the milling tool nose in the MAZATROL program of the TOOL PATH CHECK display

   Set whether, during tool path check of the MAZATROL program on the TOOL PATH CHECK display of a machine having a turning function, the tool nose of the milling tool is to be displayed with the tool diameter similarly to the M640M Pro or with a tool nose mark similarly to the M640MT Pro. 0: Display with tool diameter (M640M Pro compatible) 1: Display with tool nose mark (M640MT Pro compatible) Note : 1. A tool nose mark is always displayed when the tool path of the EIA/ISO program is checked. 2. For a machine without a turning function, this parameter is invalid and the display is always made with the tool diameter.

   Range 0, 1 · Takes effect: Immediate

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 75, 492. Reference and explanation only — not a reproduction of the manual.