‹ALARMSMazatrol Assistant
PARAMMachine parameter · TABLE (L)
L110

TABLE bit settings (8 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.
Bit settings — L110 is set bit by bit
  1. bit 0

    Opposed-spindle lathe specifications

    Takes effect: At power on

  2. bit 1

    Vertically inverted spindle specifications

    Takes effect: At power on

  3. bit 2

    Axis name of the secondary spindle

    Takes effect: At power on

  4. bit 3

    Whether to disable or enable the display of “section to be machined” in the milling tool sequence

    Takes effect: At power on

  5. bit 4

    RAM spindle specification

    Takes effect: At power on

  6. bit 5

    Correction axis for LENGTH B

    Takes effect: At power on

  7. bit 6

    Vertical lower turret specification

    Takes effect: At power on

  8. bit 7

    Z-axis direction

    Takes effect: At power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 75, 494. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →