What does Mazak parameter L111 do?

L111 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). 3 bit settings.

Which bits does Mazak parameter L111 have?

Bit 5: T-code in the index unit to be executed before the pallet change unit Bit 6: Fixed value (1) Bit 7: Whether interference check is executed or not while tailstock pushing state is released

‹ALARMSMazatrol Assistant

PARAMMachine parameter · TABLE (L)

L111

TABLE bit settings (3 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

Bit settings — L111 is set bit by bit

bit 5
T-code in the index unit to be executed before the pallet change unit
0: Output 1: Do not output
Range 0, 1 · Takes effect: Immediate
bit 6
Fixed value (1)
bit 7
Whether interference check is executed or not while tailstock pushing state is released
While tailstock pushing state is released, interference check between the barrier and the software limit is 0: Executed 1: Not executed
Range 0, 1 · Takes effect: Immediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 75, 495. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →