What does Mazak parameter L112 do?

L112 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). 8 bit settings.

What is the setting range of Mazak parameter L112?

Binary, eight digits. A changed value takes effect: At power on.

Which bits does Mazak parameter L112 have?

Bit 0: Whether traction tailstock is present or absent Bit 1: Whether carriage-connection steadyrest 1 is present or absent Bit 2: Whether carriage-connection steadyrest 2 is present or absent Bit 3: Whether carriage-connection steadyrest 3 is present or absent Bit 4: Whether carriage-connection steadyrest 4 is present or absent Bit 5: — Bit 6: — Bit 7: —

‹ALARMSMazatrol Assistant

PARAMMachine parameter · TABLE (L)

L112

TABLE bit settings (8 bits)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

Bit settings — L112 is set bit by bit

bit 0
Whether traction tailstock is present or absent
Takes effect: At power on
bit 1
Whether carriage-connection steadyrest 1 is present or absent
Takes effect: At power on
bit 2
Whether carriage-connection steadyrest 2 is present or absent
Takes effect: At power on
bit 3
Whether carriage-connection steadyrest 3 is present or absent
Takes effect: At power on
bit 4
Whether carriage-connection steadyrest 4 is present or absent
Takes effect: At power on
bit 5
—
Takes effect: At power on
bit 6
—
Takes effect: At power on
bit 7
—
Takes effect: At power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 76, 496. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →