What is the setting range of Mazak parameter L113-L116?

0 to 16. A changed value takes effect: Immediate.

PARAMMachine parameter · TABLE (L)

L113-L116

Software limit relative position check – Check reference axis L113 1st set of axes L114 2nd set of axes L115 3rd set of axes L116 4th set of axes

Q: What does Mazak parameter L113-L116 do?

L113-L116 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Software limit relative position check – Check reference axis L113 1st set of axes L114 2nd set of axes L115 3rd set of axes L116 4th set of axes. Set the axis to be taken as the check reference in software limit check in the approaching or separating direction. Specify the axis number by that of NC. The checking function will be invalid if the number is missing or if an invalid number is set.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the axis to be taken as the check reference in software limit check in the approaching or separating direction. Specify the axis number by that of NC. The checking function will be invalid if the number is missing or if an invalid number is set.

Setting

Setting range0 to 16

Unit—

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 496. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →