What is the setting range of Mazak parameter L117-L120?

0 to 16. A changed value takes effect: Immediate.

PARAMMachine parameter · TABLE (L)

L117-L120

Software limit relative position check – Check target axis L117 1st set of axes L118 2nd set of axes L119 3rd set of axes L120 4th set of axes

Q: What does Mazak parameter L117-L120 do?

L117-L120 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Software limit relative position check – Check target axis L117 1st set of axes L118 2nd set of axes L119 3rd set of axes L120 4th set of axes. Set the check target axis corresponding to the axis set as the check reference (parameter L113 to L116) for checking the software limit relative position. Specify the axis number by that of NC. The checking function will be invalid if the number is missing or if an invalid number is set.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the check target axis corresponding to the axis set as the check reference (parameter L113 to L116) for checking the software limit relative position. Specify the axis number by that of NC. The checking function will be invalid if the number is missing or if an invalid number is set.

Setting

Setting range0 to 16

Unit—

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 496. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →