What is the setting range of Mazak parameter L125?

0 to 200 (unit: ms). A changed value takes effect: Immediate.

PARAMMachine parameter · TABLE (L)

L125

Rotational axis prefiltering time constant

Q: What does Mazak parameter L125 do?

L125 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Rotational axis prefiltering time constant. Specify the time constant for smoothing the tool attitude during tool tip point control. This time constant is valid only when all the following conditions are satisfied:  High-speed smooth interpolation is valid (G05P02, G61.1, F3 bit 0 = 1)  Rotational axis prefiltering is valid (F36 bit 7 = 1)  Tool tip point control (G43.4, G43.5) is on  Cutting feed is on Even when the above conditions are met, if the setting of L125 is 0, rotational axis prefiltering will be invalid.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Specify the time constant for smoothing the tool attitude during tool tip point control. This time constant is valid only when all the following conditions are satisfied:  High-speed smooth interpolation is valid (G05P02, G61.1, F3 bit 0 = 1)  Rotational axis prefiltering is valid (F36 bit 7 = 1)  Tool tip point control (G43.4, G43.5) is on  Cutting feed is on Even when the above conditions are met, if the setting of L125 is 0, rotational axis prefiltering will be invalid.

Setting

Setting range0 to 200

Unitms

Program typeE

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 76, 497. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →