What is the setting range of Mazak parameter L13?

0 to ±900000 (unit: 0.0001°). A changed value takes effect: Immediate.

PARAMMachine parameter · TABLE (L)

L13

Allowable angle for parallelism and right angle in manual measurement

Q: What does Mazak parameter L13 do?

L13 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Allowable angle for parallelism and right angle in manual measurement. Set the allowable angle for calculation of parallelism and right angle to be measured manually. Note : When error angle is smaller than the setting angle, the parallelism and right angle are calculated.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set the allowable angle for calculation of parallelism and right angle to be measured manually. Note : When error angle is smaller than the setting angle, the parallelism and right angle are calculated.

Setting

Setting range0 to ±900000

Unit0.0001°

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 71, 465. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →