What is the setting range of Mazak parameter L133?

See explanation to the right. (unit: 0.0001 mm). A changed value takes effect: After stop of axis movement.

PARAMMachine parameter · TABLE (L)

L133

<For table tilt type (B-axis tilting table specifications)> B-axis rotation center displacement (X-axis direction)

Q: What does Mazak parameter L133 do?

L133 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Tool control rotary axis offset First rotary axis horizontal offset B-axis rotation center displacement (X-axis direction). Set the distance from the rotational center of the tool control rotary axis (at the tool side) in the direction of the horizontal axis to the rotational center of the tool control rotary axis (at the root side). Setting range: –30000 to 30000 Setting a value exceeding the upper (lower) limit has the same effect as setting the upper (lower) limit. Sets the displacement of the actual center of B-axis rotation from the reference position in the X-axis direction. Specify a minus value when the actual center of B-axis rotation is located at the plus side in the X-axis direction with respect to the reference position. Setting range: –10000 to 10000 Setting a value exceeding the upper (lower) limit has the same effect as setting the upper (lower) limit.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

<For tool tilt type> Tool control rotary axis offset First rotary axis horizontal offset <For table tilt type (B-axis tilting table specifications)> B-axis rotation center displacement (X-axis direction)

<For tool tilt type (Example: VERSATECH)> Set the distance from the rotational center of the tool control rotary axis (at the tool side) in the direction of the horizontal axis to the rotational center of the tool control rotary axis (at the root side). Setting range: –30000 to 30000 Setting a value exceeding the upper (lower) limit has the same effect as setting the upper (lower) limit. <For table tilt type (B-axis tilting table specifications) (Example: VARIAXIS)> Sets the displacement of the actual center of B-axis rotation from the reference position in the X-axis direction. Specify a minus value when the actual center of B-axis rotation is located at the plus side in the X-axis direction with respect to the reference position. Setting range: –10000 to 10000 Setting a value exceeding the upper (lower) limit has the same effect as setting the upper (lower) limit.

Setting

Setting rangeSee explanation to the right.

Unit0.0001 mm

Program type—

Takes effectAfter stop of axis movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 77, 499. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →