What is the setting range of Mazak parameter L136?

–30000 to 30000 (unit: 0.0001 mm). A changed value takes effect: After stop of axis movement.

PARAMMachine parameter · TABLE (L)

L136

<For tool tilt type> Tool rotational axis offset, horizontal axis offset amount for the 2nd rotational axis

Q: What does Mazak parameter L136 do?

L136 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Tool rotational axis offset horizontal axis offset amount for the 2nd rotational axis. Set the distance along the horizontal axis from the spindle edge to the rotational center of the tool-side rotational axis (tool side).

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

<For tool tilt type> Tool rotational axis offset horizontal axis offset amount for the 2nd rotational axis

<For tool tilt type only (Example : VERSATECH)> Set the distance along the horizontal axis from the spindle edge to the rotational center of the tool-side rotational axis (tool side).

Setting

Setting range–30000 to 30000

Unit0.0001 mm

Program type—

Takes effectAfter stop of axis movement

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 77, 500. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →