What does Mazak parameter L14 do?

L14 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Escapement for straightness measurement. Set an escape amount from a measurement point to the next point in straightness measurement.

What is the setting range of Mazak parameter L14?

0 to ±99999999 (unit: 0.0001 mm/0.00001 in). A changed value takes effect: Immediate.

‹ALARMSMazatrol Assistant

PARAMMachine parameter · TABLE (L)

L14

Escapement for straightness measurement

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Set an escape amount from a measurement point to the next point in straightness measurement.

Setting

Setting range0 to ±99999999

Unit0.0001 mm/0.00001 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 71, 466. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →