What is the setting range of Mazak parameter L151?

0 to 99999999 (unit: 0.0001 mm). A changed value takes effect: Immediate.

PARAMMachine parameter · TABLE (L)

L151

Small-diameter table thickness

Q: What does Mazak parameter L151 do?

L151 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Small-diameter table thickness. Sets the thickness of the small-diameter table. The thickness of the small-diameter table is taken into consideration in the software limit check with respect to the spindle when the tilt table is indexed in the range from 90 to 180. When 0 is set, the small-diameter table is not taken into consideration. [Related parameters] L82 (Function dedicated to machines equipped with the tilt table)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Sets the thickness of the small-diameter table. The thickness of the small-diameter table is taken into consideration in the software limit check with respect to the spindle when the tilt table is indexed in the range from 90 to 180. When 0 is set, the small-diameter table is not taken into consideration. [Related parameters] L82 (Function dedicated to machines equipped with the tilt table)

Setting

Setting range0 to 99999999

Unit0.0001 mm

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 77, 503. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →