What does Mazak parameter L17 do?

L17 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Minimum angle of head indexing command. Set a command unit of head indexing angle.

What is the setting range of Mazak parameter L17?

0 to 3600 (unit: 0.1°). A changed value takes effect: Next block.

‹ALARMSMazatrol Assistant

PARAMMachine parameter · TABLE (L)

L17

Minimum angle of head indexing command (only for INTEGREX j)

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Minimum angle of head indexing command

Set a command unit of head indexing angle.

Setting

Setting range0 to 3600

Unit0.1°

Program typeM, E

Takes effectNext block

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 71, 466. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →