What is the setting range of Mazak parameter L22-L25?

±99999999 (unit: 0.0001 mm/0.00001 in). A changed value takes effect: Immediate.

PARAMMachine parameter · TABLE (L)

L22-L25

Data of the tool nose measurement sensor L22 : Sensor width along the X-axis L23 : Sensor width along the Z-axis L24 : X-coordinate of the sensor’s reference point L25 : Z-coordinate of the sensor’s reference point

Q: What does Mazak parameter L22-L25 do?

L22-L25 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Data of the tool nose measurement sensor L22 : Sensor width along the X-axis L23 : Sensor width along the Z-axis L24 : X-coordinate of the sensor’s reference point L25 : Z-coordinate of the sensor’s reference point. Use L22 and L23 to set the dimensions of the sensor for tool nose measurement. L24 and L25 are provided to set in machine coordinates the reference point of the sensor (see the diagram below). Example : [INTE , INTE e-H , lathes] 1. For No. 1 turning spindle Set the imaginary upper left corner of the sensor as its reference point for No. 2 spindle. [INTE e-V ] 2. L23 Note : As shown above, the X- and Z-axes must be replaced with each other between INTEGREX e-H and e-V .

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Use L22 and L23 to set the dimensions of the sensor for tool nose measurement. L24 and L25 are provided to set in machine coordinates the reference point of the sensor (see the diagram below). Example : [INTE , INTE e-H , lathes] 1. For No. 1 turning spindle Set the imaginary upper left corner of the sensor as its reference point for No. 2 spindle. [INTE e-V ] 2. L23 Note : As shown above, the X- and Z-axes must be replaced with each other between INTEGREX e-H and e-V .

Setting

Setting range±99999999

Unit0.0001 mm/0.00001 in

Program typeM

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 468. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →