What is the setting range of Mazak parameter L27?

0 to 65535 (unit: 7.1 ms). A changed value takes effect: Immediate.

PARAMMachine parameter · TABLE (L)

L27

Timer setting for manual TOOL EYE measurement

Q: What does Mazak parameter L27 do?

L27 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Timer setting for manual TOOL EYE measurement. During manual TOOL EYE measurement, even if the sensor turns on for a time shorter than that which has been specified in this parameter, that will not be regarded as sensor-on.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

During manual TOOL EYE measurement, even if the sensor turns on for a time shorter than that which has been specified in this parameter, that will not be regarded as sensor-on.

Setting

Setting range0 to 65535

Unit7.1 ms

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 71, 469. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →