What is the setting range of Mazak parameter L30?

0 to 999. A changed value takes effect: Immediate.

PARAMMachine parameter · TABLE (L)

L30

Selection of machining navigation case introduction messages

Q: What does Mazak parameter L30 do?

L30 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Selection of machining navigation case introduction messages. Select for each machine model the appropriate case introduction messages on MACHINING NAVIGATION-PREDICTION display. Specific data is preset for each machine model. Do not disturb the presettings.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

Select for each machine model the appropriate case introduction messages on MACHINING NAVIGATION-PREDICTION display. Specific data is preset for each machine model. Do not disturb the presettings.

Setting

Setting range0 to 999

Unit—

Program typeM, E

Takes effectImmediate

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 71, 470. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →