What is the setting range of Mazak parameter L37?

0 to 180 (unit: °). A changed value takes effect: At power on.

PARAMMachine parameter · TABLE (L)

L37

Minimum index angle of index table

Q: What does Mazak parameter L37 do?

L37 is a Machine parameter in the TABLE group of the MAZATROL SmoothX control (INTEGREX e-670H). Minimum index angle of index table. For the command to rotate the index table, specify the minimum index angle for angle command by the M-code or B-code. Note : This parameter is ineffective for the system with an NC rotary table.

Machine-specific. This parameter list is specific to the Mazak INTEGREX e-670H / e-670H-S with the MAZATROL SmoothX control (manual HA64HA0035E). Other Mazak models and control generations use different addresses, ranges and meanings — verify on your own control before changing anything.

What it does

For the command to rotate the index table, specify the minimum index angle for angle command by the M-code or B-code. Note : This parameter is ineffective for the system with an NC rotary table.

Setting

Setting range0 to 180

Unit°

Program typeM

Takes effectAt power on

Source

Mazak PARAMETER LIST / ALARM LIST / M-CODE LIST, manual HA64HA0035E, p. 71, 470. Reference and explanation only — not a reproduction of the manual.

Not sure what to set? Ask the Mazatrol assistant →